Cromar INT/195 GRP Internal Angle Trim - 100mm x 65mm x 3m
Product Description
The INT/195 internal angle trim is a multi-purpose preformed angle trim designed for uses such as parapet copings, flush trimming and neat internal angles and upstands.
Can be pushed under slates to form a neat finish around the edges of the roof.
Suitable for use with a GRP/fibreglass flat roofing system:
Benefits
- Fire retardent
- UV-resistant
- Weatherproof
- Fully bonds to the roof membrane to form one complete system
- Special additives to give an especially low styrene emisson
- During and after application
Application
- Ideal for large or small flat roofs
- Suitable for heavy foot traffic
- Load bearing
- Applied by brush/roller
- Apply 1-2 coats
- Cold-applied
Product Specification
| Brand | Cromar |
| Colour | Grey |
| Height | 100mm |
| Length | 3m |
| Location | Internal |
| Material | GRP |
| Product Type | Edge trims |
| Width | 65mm |
Delivery, Cancellation & Returns
For our delivery, cancellation and returns policy.
Delivery charges are included in the final shopping basket total and will depend on the basket's contents. Additional shipping charges may apply to orders from the Scottish Highlands and UK islands.
These extras delivery charges are based on certain costs from the manufacturer, distributor or our own couriers. Not all products will be applicable.
If additional shipping fees apply, a member of our team will contact you before processing your order to let you know.
We will do our very best to make sure your delivery arrives by the date required, however manufacturer availability and delivery schedules cannot always guarantee this.
Should your estimated delivery date differ from that displayed on our website, one of our team will inform you by email or telephone
If we cannot make a delivery due to access not being possible, we reserve the right to make a failed delivery charge.
